| Last Modified: 11-29-2007 | 1.6 A | |
| Service Category: Vehicle Exterior | Section: Exterior Panels/Trim | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000003GRR000X |
| Title: EXTERIOR PANELS / TRIM: FRONT DOOR BELT MOULDING: INSTALLATION (2008 Sequoia) | ||
INSTALLATION
1. INSTALL FRONT DOOR GLASS OUTER WEATHERSTRIP ASSEMBLY
(a) Engage the 5 claws and clip and install a new front door glass outer weatherstrip.
2. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY
3. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY
HINT:
Use the same procedure as for the RH side
.
4. INSTALL FRONT ARMREST BASE UPPER PANEL
HINT:
Use the same procedure as for the RH side
.
5. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG
HINT:
Use the same procedure as for the RH side
.
6. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH
HINT:
Use the same procedure as for the RH side
.
|
|